Detective offices

Water detective offices have been under scrutiny since the late 1970s when police offices were in their infancy. Computer rooms like today contain AC that contains water for humidifiers and sometimes cold water for cooling. As a result of the many power cables, data cables, and water pipes required in the room, a raised floor was used and continues to be used to cover all services. Unfortunately, any water leaking under this raised floor will not be discovered until the power/data connections are submerged in water as well as police offices. In the mid-1980s, water was a detective office that used point detection sensors.

These units will include either an engraved PCB or two metal electrodes. Water detection is completed using a DC voltage sensor and apron while purchasing a return signal from the other. As long as no return signal came from the return sensor, there was no water. The condition that used this type of system was the corrosion of the sensors resulting from the electrolysis as well as the limited water detection section, water could flow from the sensors and stop being detected until very late. The water detective office cable was developed in the mid-1980s. The luxury of this kind of feeling is that water is detected during the entire time period of the cable. This allowed areas or equipment containing water to be surrounded, ensuring that leaks were found regardless of the direction of actual flow.

Since the mid-1980s, through which progress has been made today in the use of alarm panels, as well as the reporting of water leaks. Today with full messaging, email, receive a cell phone call, record it using a building management system or please get the easy buzzer and light bulb. Until the 1980s and 1990s, I developed a process for building water detection cables and safety systems to detect water leaks of your choice in 128 different areas or zones. The top-of-the-range multi-zone control unit used addressable outputs with four independent water detection zones, as well as a 24-digit alphanumeric display to inform the actual leak position in words and numbers.

In 2003, by mutual consent, both my partner and I thought we would stop trading and close the factory. Included in the Way of the Way split, I took the information planning rights with me at night along with the cable out of the police offices and started detective offices with two of my sons. From 2003 onwards, developments were mainly in the use of the alarm controller as a result of improvements in electronics. The last three decades Looking for a person responsible for the design of several thousand water detection systems that have been installed in every application imaginable from large government security buildings through which small police offices from Greece and abroad.

Visit our article: https://shude-tective.webnode.page/

Leave a comment

Design a site like this with WordPress.com
Get started